Your water heater is one of the used and more appliances in your home, and consumes a large regarding your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving from the home heating and costs.
Regular flushing of one’s water heater is probably the single most important step you get to prolong its service life and even save energy. In a period of time, sediments amass in the bottom of your water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. In part destructive to the tank, but highly inefficient and will significantly raise your heating costs.
In most areas of the country, the average water heater lasts 3-5 years. Regularly flushing your water heater can double daily life of your water heater from 3-5 to 7-10 years. And with the costs of replacement running from $700 to over $1200 in some cases, getting the most out of your heater is a must in today’s economic condition. In addition, regular flushing makes your water heater run more efficiently and can cut heating costs fifty percent. Depending on the volume of hot water your home uses, that can mean a savings of $20 to over $50 a fair amount of time.
To drain your water heater, on the internet should set the thermostat to pilot (if it is really a gas water heater) or turn the circuit breaker off (if it is definitely an electric heater). Failure to do so could result in overheating and severe damage to the actual heater. Next, close the water supply valve located more than a water inlet line going into your water heater. You may then connect a hose to the drain valve located in the bottoom of the central heater. Open the drain and allow it to play until all from the water has emptied from the air conditioner. Then close the drain. Open the water supply valve and refill the heating. You should also open a hot water faucet somewhere at home and stand there and watch it run for several minutes until the water flows out perfectly. This will allow air to vent from the heater and the hot water lines. Finally, you can turn the thermostat back to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).
Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your dwelling to filter or condition the water so is actually always less corrosive to your plumbing system, particularly in areas which have hard hot water. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in region to discuss options and merchandise to provide what you need.
Abacus Plumbing, Air Conditioning & Electrical
The Woodlands, TX
(281) 528-1610